GreenMaster HP is made up of 2 floors and 6 modules, which entails flexible placement of the unit in tight spaces. Below you can find the standard variants we offer.
If the property lacks the required space indoors, the GreenMaster HP Compact and GreenMaster C-F can be delivered ready for outdoor installation on top of the roof.
GreenMaster HP Compact
A compact solution where the ventilation unit and heat pump unit are mounted on top of each other from factory, with all brine connections inside the unit connected. If the height is sufficient and it is possible to put everything in the same place, Compact is the preferred variant.
| Top floor |
Bottom floor |
| GreenMaster casing | Inverter controlled 12 eller 16 kW |
| Filter | On/off-controlled 12, 15, 20 eller 30 kW |
| Cooling coil (brine) | Air-Site myUpway |
| Fire bypass | Valves, pipes, isolation, pumps etc. |
| Exhaust fan |
GreenMaster C-F with separate heat pump
A solution for attics with low ceiling and extract ventilation. The heat pump is placed in the mechanical room, which provides easier access for service technicians with less units on the attic to conduct service on.
| Top floor |
Separate module |
| GreenMaster casing | F1155-12, -16 |
| Filter | F1345-24, -30, -40, -60 |
| Cooling coil (brine) | Control unit for cloud service included |
| Fire bypass | Performed on site |
| Exhaust fan | Valves, pipe, isolation, pumps etc. |
| GreenManager | Filling |
| Start up |
GreenMaster HP Compact Low
A solution for attics with low ceiling where the ventilation unit and heat pump unit fit. The units are placed next to each other, which gives a relatively short pipe connection for the brine solution.
| Separate unit | Separate module |
| GreenMaster casing | Inverter controlled 12 eller 16 kW |
| Filter | On/off-controlled 12, 15, 20 eller 30 kW |
| Cooling coil (brine) | Air-Site myUpway |
| Fire bypass | Performed on site |
| Exhaust fan | Valves, pipes, isolation, pumps etc. |
| Filling | |
| Start up |
